Diamonds are known as one of the hardest substances known. This is the reason that they make tools that are needed for difficult jobs. Mining industry requires tools that are strong and powerful that can drill through any hard surface. This brought forth the introduction of diamond drilling, which is used to determine whether a certain area can be mined or not. It is not easy for one to do diamond drilling; it requires a technique and understanding of how the tools can be used. Below are tips about diamond drilling (diamantboring tips in Danish).
There are several types of diamond drills, for this reason it is crucial that you select the appropriate diamond drill. Most people do trial and error when it comes to the selection of the diamond drill to be used in a certain parameter. This can be avoided through the understanding of how these parameters can be used for a certain application. What should be understood is that what is used in one application might not work on a different application. This should be noted to avoid inconveniences or wasting time on a drill that will not be effective in a certain area.
Even for those that do not have experience, these tips for diamond drilling are useful to help you get started. Before drilling it is important that you examine the drill if it has any damage. In case of any damage it is advisable that the drill is not used. Using drills that are damaged or have been mounted incorrectly can be very dangerous. Ensure that the drill you are using is well maintained and has been serviced. You should also ensure that you have the proper equipments from the headgear, goggles, snug clothing that is fitting, footwear, hearing protection and also the respiratory equipments.
It is important that the drills checked for run out. Run out in a drill cause it to have excess vibration whenever one is using it. It also affects the shape of the circumference of the hole. Run out makes the hole that one is drilling not to have the perfect roundness, instead it becomes uneven and ellipse. Diamond bit run out tends to affect the tolerance that one is able to attain. Every drill is made such that it is able to hold a certain run out and tolerance. This is another important factor to consider when purchasing a drill, ensure that you have indicated the tolerance and run out that you need.
Drilling accessories should be properly held. In case the diamond drill is not running true, one should loosen the chunk of the machine, to do this turn the machine at 90 degrees and then use the drill again. If this fails, you should examine the condition of the machine. Another option can be mounting the drill on another machine, to accomplish the objectives one should ensure that the drill is in proper condition. It does not matter how the diamond drill has been made, it will not offer you close tolerance if either the chunk of the shaft of the drilling machine is vibrates or misaligned. http://www.agerboteknik.dk/diamant-skaeringboring/